Wednesday, April 26, 2017

Hackintosh on HP EliteDesk 800 G1, i5-4570


Note: this will probably work for other EliteDesk Towers, Small Form 
Factor and Ultra Small Form Factor





1. Installed Sierra from a real MAC to the hard drive going into the HP EliteDesk 800 G1
2. Installed Clover v4061 from real MAC to hard disk
       Bootloader - Install boot0af in MBR
       CloverEFI - CloverEFI 64-bits SATA
       Drivers64UEFI - OsxAptioFixDrv-64
       Install all RC scripts on target volume
       Install Clover Preference Pane
Used Clover Configurator to Edit config.plist but see below for the code
4 Added the following Kext's to \EFI\CLOVER\kexts\Other
      FakeSMC.kext
      IntelMausiEthernet.kext
5 Sound working with VoodooHDA 2.8.9 Clover-V6

Important for video HD4600

<key>IntelGFX</key>
<string>0x04128086</string>


<key>Intel</key>
<true/>

<key>LoadVBios</key>
<true/>

<key>ig-platform-id</key>
<string>0x0D220003</string>

<string>iMac14,1</string>

2 comments:

  1. It would be nice if you can provide the whole step or links too.

    ReplyDelete
  2. Thanks for the feedback, all of these files can be download from Insanelymac.com, you can register a free account that will give you access.

    The only files needed to download is Clover, and the two KEXT's,
    once you have those you are good to go. I have a real Mac so installing without one is a much more intensive process but that is all document on that site.

    ReplyDelete